Graphic Engineering
Engineers to the Print Finishing Industry
Our workshop is equiped to carry out most repairs, make parts etc. We have a lathe, mill, bearing press, Arc, mig and gas for welding. In my early years i went to a techinica high school, worked as a tool maker in a small maintenance department. We have a CAD system and often 3D print parts if possible.
Workshop
This is our optimum lathe
The fan was completely clogged with dust, causing the aluminium to catch and jam.
The gearbox shaft bearing had seized. Replaced shaft and bearing.
A worn shaft
Motor bearing and seal had worn.
A closer look at the dust build up
Worn stub shaft and flange was replaced.
Iram collett damage